Spray applied plasters have been widely used in Europe since the 1960’s and is today one of the main forms of plastering used in modern building systems.
Terraco with its Sprayplaster systems is a market leader in spray-applied surface preparation compounds.
Terraco Sprayplaster is the ideal solution for large fast-track projects or indeed any project – where cost, time and quality are of paramount importance! Specified by architects, used by builders!
Terraco offers two main types of renders:
1. Sprayplaster:
Sprayplaster is a range of ready-mixed and polymer modified cementitious, spray applied plasters. Sprayplaster has been applied on millions of square metres of walls and ceilings around the globe every year. These are long-life products with guaranteed performance.
Designed for thin coat application, Sprayplaster significantly reduce the deadweight of buildings – 10mm of Sprayplaster will weigh approximately 18 kg/m² while a traditional plaster, applied at the typical minimum thickness of 15mm, will weigh approximately 33 kg/m². A weight reduction of 45%!
2. Terramix:
Terramix is a range of cementitious trowel or spray applied plasters. Formulated for plastering and repair of exterior and interior surfaces of cast in-situ concrete, lightweight concrete, fair-faced dense concrete, blockwork and brickwork. It provides a hard, smooth, water resistant finish which is suitable for painting and wall papering.
Terramix is both hydraulically and organically bound, guaranteeing excellent adhesion to the substrate. It is also ideally suited for application as a basecoat in the Terraco Sprayplaster system.
Available in three grades: Standard, Fine and Coarse – in two colours, grey and white.
This product group consists of a range of dry-mix performance mortars developed for use as light weight block mortars and decorative brick mortars, which provide excellent long term value and durability. One such product is Blockfix™.
Blockfix™ is a specially developed thin joint and repair mortar used with ALC blocks. These thin-application products are produced to provide reliable adhesion while helping to minimise thermal bridging and other problems commonly associated with traditional mortars. It is available in two colours, grey and white. A cementitious specially formulated thin joint and repair mortar used with ALC blocks.
This ensures that the joint width is kept to a minimum hence eliminating the cause of thermal bridging associated with traditional mortars.
Please contact your Terraco representative for further technical assistance.
Sprayplaster Brochure
download
