fbpx
 

Terracoat Stain

Terracoat Stain is ready-mixed, elastomeric pigmented coating, especially designed as a topcoat for cementitious acrylic textured coatings such as our decorative renders.

It can also be used to overcoat pigmented and non-pigmented Terracoat Textured Coatings.

Application Method: Phun

Product Overview

When overcoating an existing textured wall coating, very often the customer wants to simply change the colour to give the building a fresh look, but still wants to maintain the existing texture. You can achieve this using Terracoat Stain.

This ready-mixed, low profile, pigmented topcoat imparts colour to the surface with minimum film build, thereby allowing the original textured appearance to be maintained. Terracoat Stain is also used as a topcoat for Terol mineral based products.

Using pure acrylic resins, fade resistant pigments and a high performance film preservative, it ensures a weather resistant film is achieved. This product is specifically formulated and designed for application as a topcoat for Terracoat Textured Coatings in these instances.

Properties

  • Available in a wide range of colours.
  • Excellent weather and UV resistance.
  • High opacity, low profile coating.
  • Provides an attractive mid sheen finish.
  • Excellent dirt pick-up resistance.
  • Environmentally friendly.

Areas Of Use

  • Used as a topcoat for Terol mineral based renders.
  • Used to rejuvenate existing Terracoat Textured Coating projects.
  • Ideal for large scale projects where final topcoats are required prior to hand over where non pigmented Terracoat has been used.
  • Applied by brush, roller or spray.

Application Method

Preparation of Surface

New Terracoat Substrate: Allow the Terracoat to dry for a period of 72 hours prior to application of Terracoat Stain. No priming is required

Old textured surfaces: Check surface for soundness and make good any damages. Remove any flaking material and apply fresh base texture. Clean surface with a soda/water solution and rinse with clean water. Treat any mould, fungus, algae with a sterilizing solution prior to application of a coat of Penetrating Primer.

Application & cleaning of tools

Terracoat Stain is applied on new and old substrates in 2 coats, using spray, roller or brush.

Clean tools and equipment with water after use.

Downloads

Architectural Coatings & Finishes Brochure

view now

Available Grades

Pastel Mid Clear 61780 61782 61783 61784

Product Color Product Code
White 61223
Pastel 61225
Mid 61226
Clear 61227

Terracoat Stain

Terracoat Stain is ready-mixed, elastomeric pigmented coating, especially designed as a topcoat for cementitious acrylic textured coatings such as our decorative renders.

It can also be used to overcoat pigmented and non-pigmented Terracoat Textured Coatings.

Application Method: Phun

Product Overview

When overcoating an existing textured wall coating, very often the customer wants to simply change the colour to give the building a fresh look, but still wants to maintain the existing texture. You can achieve this using Terracoat Stain.

This ready-mixed, low profile, pigmented topcoat imparts colour to the surface with minimum film build, thereby allowing the original textured appearance to be maintained. Terracoat Stain is also used as a topcoat for Terol mineral based products.

Using pure acrylic resins, fade resistant pigments and a high performance film preservative, it ensures a weather resistant film is achieved. This product is specifically formulated and designed for application as a topcoat for Terracoat Textured Coatings in these instances.

Properties

  • Available in a wide range of colours.
  • Excellent weather and UV resistance.
  • High opacity, low profile coating.
  • Provides an attractive mid sheen finish.
  • Excellent dirt pick-up resistance.
  • Environmentally friendly.

Areas Of Use

  • Used as a topcoat for Terol mineral based renders.
  • Used to rejuvenate existing Terracoat Textured Coating projects.
  • Ideal for large scale projects where final topcoats are required prior to hand over where non pigmented Terracoat has been used.
  • Applied by brush, roller or spray.

Application Method

Preparation of Surface

New Terracoat Substrate: Allow the Terracoat to dry for a period of 72 hours prior to application of Terracoat Stain. No priming is required

Old textured surfaces: Check surface for soundness and make good any damages. Remove any flaking material and apply fresh base texture. Clean surface with a soda/water solution and rinse with clean water. Treat any mould, fungus, algae with a sterilizing solution prior to application of a coat of Penetrating Primer.

Application & cleaning of tools

Terracoat Stain is applied on new and old substrates in 2 coats, using spray, roller or brush.

Clean tools and equipment with water after use.

Downloads

Architectural Coatings & Finishes Brochure

view now

Available Grades

Pastel Mid Clear 61780 61782 61783 61784

Product Color Product Code
White 61223
Pastel 61225
Mid 61226
Clear 61227