Product Overview

木纹漆是一种高品质、耐用、水性的墙面装饰涂料，可仿造木材的外观。

随着保护世界自然资源（如木材）的需求日益增加，木纹漆为设计师在建筑设计木材特色元素时提供了一种环保产品选择。最终的外观会随施工人员手法决定，由他们创造了“木材外观”。

该产品有多种定制颜色可供选择，让设计师可以选择创造出与众不同的东西。

Properties

木纹漆是一种适用于室内和室外的墙面装饰系统，可通过木纹漆（底漆）BC 和木纹漆（面漆）TC 的颜色组合创造类似木板的效果，具有以下特性：

• 适用于室内和室外应用 – 透气性能好。
• 极其耐候。
• 抗紫外线、盐碱空气和工业污染物。
• 抵御空气污染 – 保持更长时间的洁净

Areas Of Use

Superwood™ can be applied over levelled surfaces to replicate wood appearance in the following areas:

• Used to replicate a wooden texture
• Ideal for feature walls
• Cementitious rendered walls, concrete and cement fibre boards
• Ideal for use as a decorative finish on Terraco EIFS

Application Method

Preparation of surface:

New / Old surfaces: Ensure that all dust, dirt and foreign matter are scraped and brushed away. Also ensure the surfaces are free from salts, oil, grease and ridges. Protect all adjacent surfaces not to be covered. All cracks, chips, voids and damages should be repaired with Handycoat Exterior (for exterior application) or Handycoat Fine/ Handycoat interior Stucco Putty (for interior application). Sand down the surface to ensure it is smooth and even. Remove all dust.

Application and Cleaning of Tools:

1. Apply two coats of Superwood™ BC uniformly by brush, roller or spray, leaving drying time of 4-6 hours between the coats. Ensure that second coat application of Superwood™ BC gives uniform colour to the substrate.
2. Allow final coat of Superwood™ BC to dry overnight.
3. Ensure that surface temperature is below 25°C prior to application of Superwood™ TC.
4. Apply Superwood™ TC by brush/fine roller followed by pattern creation, using different designing tools, to create a “wood like” effect, according to approved site mock-up sample.
5. Allow to dry for 24-48 hours. A 20-30% retarder solution can be added in Superwood™ TC colours to extend the application time of Superwood™ TC.
6. Clean tools and equipment with water after use.

Designing the texture to give a wooden effect:

1. In order to achieve desired appearance, it is strongly recommended to work with
   experienced and professional painters and decorators.
2. Superwood™ system is designed for creating feature areas replicating wood effect. It is recommended that the area to be coated should be divided into smaller panel sizes using masking tape joints or grooves for a better uniform finish as continuous
   application over large areas is extremely difficult to achieve.
3. It is recommended that the area should be prepared with tape joints. This allows any touch-ups/repairs required to the appearance to be done easily.
4. Do not apply if rain is expected over the next 24 hours (for each coat application).
5. Drying time depends on site conditions.

Downloads

Superwood Brochure

view now

Available Grades