Maxipsray FC (Finishcoat)

Terraco Maxispray FC is an acrylic-based, ready-mixed, polymer modified, skimming compound for use on
concrete substrates to level the surface up to 2mm thickness. It gives a high quality, even surface for painting or
other finishes.

Application Method: Spray
Grades: Acrylic

Product Overview

Terraco Maxispray FC is an acrylic-based, ready-mixed, polymer modified, skimming compound for use on
concrete substrates to level the surface up to 2mm thickness. It gives a high quality, even surface for painting or
other finishes. It eliminates the need for further fillers and primers prior to painting.

Terraco Maxispray FC is suitable for both precast and conventional buildings. It can be applied to either new or old solid surfaces of precast or fair-faced concrete, sand/cement render, fair-faced and leveled brickwork, etc.

It is also used as a finishing coat for Terraco Sprayplaster Basecoat or Terraco Sprayplaster Basecoat DP. For ceiling application, the final coat of Maxispray FC can be left spray textured, without further decoration.

The finished Maxispray surface does not require priming before painting.

Properties

Terraco Maxispray FC is a ready to use compound, formulated from a selected blend of acrylic polymers and precisely graded fillers with the following properties:

The products are:

  • Low VOC
  • Easy to use
  • Does not flake off
  • Fire resistant (ASTM E-84 class-A)
  • High coverage
  • Quick drying
  • High adhesion power

Areas Of Use

For use on all non-wet interior areas requiring up to 2mm thickness. Terraco Maxispray FC is suitable for both precast and conventional buildings.

It can be applied to either new or old solid surfaces of precast or fair-faced concrete, sand/cement render, fairfaced
and leveled brickwork, etc.

It is also used a Finishcoat for Terraco Sprayplaster Basecoat or Terraco Sprayplaster basecoat DP.

Application Method

Surface Preparation:

Ensure that dust, dirt and foreign matter are brushed away. Ridges and form oil must also be removed

Application:

Terraco Maxispray FC is applied over Terraco Sprayplaster Basecoat by spray or trowel. If dilution is required use 2-3% clean water. Apply 2 coats of Terraco Maxispray FC at maximum 1.3mm thickness per coat and level with a steel-edged spatula.  Allow approx. 6-8 hours drying time between coats.

Downloads

Maxispray FC

view now

Available Grades

Product Name Code
Maxispray FC 63268