Terracoat Stain is ready-mixed, elastomeric pigmented coating, especially designed as a topcoat for cementitious acrylic textured coatings such as our decorative renders.
It can also be used to overcoat pigmented and non-pigmented Terracoat Textured Coatings.
When overcoating an existing textured wall coating, very often the customer wants to simply change the colour to give the building a fresh look, but still wants to maintain the existing texture. You can achieve this using Terracoat Stain.
This ready-mixed, low profile, pigmented topcoat imparts colour to the surface with minimum film build, thereby allowing the original textured appearance to be maintained. Terracoat Stain is also used as a topcoat for Terol mineral based products.
Using pure acrylic resins, fade resistant pigments and a high performance film preservative, it ensures a weather resistant film is achieved. This product is specifically formulated and designed for application as a topcoat for Terracoat Textured Coatings in these instances.
Preparation of Surface
New Terracoat Substrate: Allow the Terracoat to dry for a period of 72 hours prior to application of Terracoat Stain. No priming is required
Old textured surfaces: Check surface for soundness and make good any damages. Remove any flaking material and apply fresh base texture. Clean surface with a soda/water solution and rinse with clean water. Treat any mould, fungus, algae with a sterilizing solution prior to application of a coat of Penetrating Primer.
Application & cleaning of tools
Terracoat Stain is applied on new and old substrates in 2 coats, using spray, roller or brush.
Clean tools and equipment with water after use.
Architectural Coatings & Finishes Brochure
view nowPastel Mid Clear 61780 61782 61783 61784
Product Color | Product Code |
---|---|
White | 61223 |
Pastel | 61225 |
Mid | 61226 |
Clear | 61227 |